? coilcraft, inc. 2011 specifications subject to change without notice. please check our website for latest information. smt power inductors C mss5131 document 642-1 document 642-1 revised 01/03/11 dcr srf i sat (a) 4 i rms (a) 5 inductance 2 max typ 3 10% 20% 30% 20c 40c part number 1 20% (h) (ohms) (mhz) drop drop drop rise rise mss5131-222ml_ 2.2 0.023 65.0 1.76 2.08 2.30 2.00 3.30 mss5131-332ml_ 3.3 0.032 60.0 1.33 1.58 1.73 1.60 2.90 mss5131-472ml_ 4.7 0.045 48.0 1.08 1.32 1.42 1.40 2.50 mss5131-562ml_ 5.6 0.055 44.0 1.00 1.20 1.30 1.30 2.30 mss5131-682ml_ 6.8 0.060 42.0 0.98 1.14 1.24 1.20 2.16 mss5131-822ml_ 8.2 0.075 40.0 0.90 1.04 1.18 1.10 2.00 mss5131-103ml_ 10 0.083 38.0 0.85 0.98 1.13 1.00 1.90 mss5131-123ml_ 12 0.100 35.0 0.72 0.85 0.94 0.97 1.60 mss5131-153ml_ 15 0.115 32.0 0.67 0.78 0.86 0.94 1.50 mss5131-183ml_ 18 0.150 26.0 0.61 0.72 0.79 0.89 1.40 mss5131-223ml_ 22 0.160 22.0 0.54 0.64 0.70 0.87 1.30 mss5131-273ml_ 27 0.190 19.0 0.48 0.56 0.62 0.85 1.20 mss5131-333ml_ 33 0.216 18.0 0.44 0.52 0.58 0.80 1.10 mss5131-393ml_ 39 0.290 17.0 0.42 0.50 0.55 0.74 1.00 mss5131-473ml_ 47 0.320 16.0 0.38 0.46 0.51 0.71 0.95 mss5131-563ml_ 56 0.365 15.0 0.34 0.42 0.47 0.70 0.90 mss5131-683ml_ 68 0.480 12.5 0.31 0.38 0.42 0.66 0.85 mss5131-823ml_ 82 0.520 12.0 0.27 0.32 0.35 0.62 0.80 mss5131-104ml_ 100 0.700 11.5 0.26 0.30 0.33 0.55 0.69 mss5131-124ml_ 120 0.800 11.0 0.23 0.27 0.30 0.51 0.62 mss5131-154ml_ 150 1.10 10.0 0.21 0.26 0.28 0.47 0.58 mss5131-184ml_ 180 1.20 9.0 0.19 0.23 0.25 0.43 0.54 mss5131-224ml_ 220 1.40 8.0 0.18 0.21 0.23 0.39 0.50 mss5131-274ml_ 270 1.80 7.5 0.15 0.18 0.20 0.35 0.45 mss5131-334ml_ 330 2.10 6.8 0.13 0.17 0.19 0.32 0.42 mss5131-394ml_ 390 2.20 5.4 0.12 0.15 0.16 0.30 0.38 designer?s kit c362 contains 3 of each value core material ferrite core and winding loss see www.coilcraft.com/coreloss terminations rohs compliant matte tin over nickel over phos bronze (current production) or gold over nickel over phos bronze (prior production). other terminations available at additional cost. weight 0.20 ? 0.24 g ambient temperature ?40c to +85c with i rms current, +85c to +125c with derated current storage temperature component: ?40c to +125c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 600/7 reel, 2500/13 reel; plastic tape: 12 mm wide, 0.35 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth pcb washing only pure water or alcohol recommended 1. please specify termination and packaging codes: mss5131-394m lc termination: l = rohs compliant matte tin over nickel over phos bronze (current production) or gold over nickel over phos bronze (prior production). special order: t = rohs tin-silver-copper (95.5/4/0.5) over gold over nickel over phos bronze or s = non-rohs tin-lead (63/37) over gold over nickel over phos bronze. packaging: c = 7 machine-ready reel eia-481 embossed plastic tape (600 per full reel). b = less than full reel in tape, but not machine-ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel eia-481 embossed plastic tape. factory order only, not stocked (2500 per reel per full reel). 2. inductance tested at 100 khz, 0.1 vrms, 0 adc using an agilent/hp 4263b lcr meter or equivalent . 3. srf measured using agilent/hp 4191a or equilvalent. 4. dc current at which the inductance drops the specified amount from its value without current. 5. current that causes the specified temperature rise from 25c ambient. 6. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering. ? 5.1 5.1 mm footprint; 3.1mm high shielded inductors ? low dcr and excellent current handling
? coilcraft, inc. 2011 specifications subject to change without notice. please check our website for latest information. document 642-2 document 642-2 revised 01/03/11 smt power inductors C mss5131 0.01 0.1 110 current (a) 1 10 100 1000 inductance (h) 100 h 390 h 10 h 2.2 h typical l vs current irms derating -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 25c percent of rated rms i typical l vs frequency 0.01 0.1 110 frequency (mhz) 10 1 100 1000 inductance (h) 10 h 100 h 390 h 2.2 h dimensions are in inches mm max 0.181 4,6 0.181 4,6 0.063 1,6 0.200 5,1 0.200 5,1 123 * * 0.122 3,1 * dimensions are of the case not including the termination. for maximum overall dimensions including the termination, add 0.035 in / 0,9 mm. recommended land pattern 0.069 1,74 0.200 5,08 0.200 5,08 0.159 4,05 ?
|
